Skip to main content
Split printing sends different parts of an order to different printers. This is essential for venues where drinks are prepared at the bar and food is prepared in the kitchen.

How It Works

When an order comes in containing items from multiple categories:
  • Drinks print at the bar printer
  • Food prints at the kitchen printer
  • Desserts print at the pastry station
Each printer only receives the items relevant to that station, reducing confusion and speeding up preparation.
Split printing requires two or more connected printers. See Printer Setup to connect additional printers.

Setting Up Split Printing

Step 1: Connect Multiple Printers

Before configuring split printing, ensure you have at least two printers connected:
  1. Open your storekit dashboard
  2. Select your store
  3. Go to Settings → Direct Printing
  4. Verify you have two or more printers showing as Online
If you only have one printer, add another printer first.

Step 2: Assign Categories to Printers

  1. Go to Menus in your dashboard and open the menu
  2. Click on a category (e.g., “Drinks”)
  3. Select the Printing tab
  4. Tick the printer(s) that should receive orders from this category
  5. Click Save in the bottom bar
  6. Repeat for each category

Example Setup

Default Behaviour

No printers assigned to category: If no item in the order belongs to a category with printers assigned, the whole order prints to all printers. If the order mixes assigned and unassigned categories, the unassigned items only print on the printers that receive the assigned items. Printers assigned to category: The category only prints to the assigned printer(s).
You only need to configure categories you want to route to specific printers. Unconfigured categories print to all printers only in orders with no routed items; in a mixed order they follow the routed items, so make sure every category a station needs is assigned to it.

Common Setups

Restaurant (Kitchen + Bar)

Cafe (Kitchen + Coffee Station)

Large Kitchen (Multiple Stations)

Printing to Multiple Printers

A category can be assigned to multiple printers. This is useful when:
  • You want a master copy at a pass/expediting station
  • Multiple stations prepare items from the same category
  • You need backup copies for busy periods
To print a category to multiple printers, simply tick multiple printers in the category’s Printing settings.

Tips

Start simple. Begin with two printers (kitchen + bar) and add more stations as needed. It’s easier to add complexity than to debug a complicated setup.
  • Label your printers clearly - Use descriptive names like “Kitchen” and “Bar” rather than “Printer 1” and “Printer 2”
  • Test after setup - Place a test order with items from different categories to verify routing
  • Check all categories - Make sure every category is assigned to at least one printer
  • Consider expediting - Some venues assign all categories to a “Pass” printer for the expeditor